5052 H32 Aluminum Plate Aluminum Association, 1200mm*2400mm Hot Rolled Large Quantity Store Decoration Material
Model No.: 5052 H32
Chromium 0.15 - 0.35
Copper 0.1 max
Magnesium 2.2 - 2.8
Manganese 0.1 max
Remainder Each 0.05 max
Remainder Total 0.15 max
Silicon + Iron 0.45 max
Zinc 0.1 max
Size:thickness from 0.5mm-300mm
width from 1000-1500mm
length from 2000-6000mm
The size can be customized.
Principal Design Features:
This is a non-heat treatable alloy that is weldable. It is hardened by cold work. It has good forming characteristics and good corrosion resistance, including resistance to salt water.
Commonly used in the manufacture of hydraulic tubes, kitchen cabinets, small boats, home freezers, milk crates, aircraft tube, fencing, and appliances. Commonly used in sheet metal work and in sheet metal parts.
This alloy has relatively fair machinability. It is easier to machine in the hard temper than as annealed and the quality of finish is better if machined in the hard condition. Oil lubricants should be used for machining, except that very light cuts may be done dry.
AL 5052 is readily formed at room temperature. Successive cold working decreases the formability.
This alloy is readily welded by conventional methods. When filler rod is required it should be aluminum alloy 5356 as filler. Either tungsten or consumable electrode inert gas shielded arc welding is preferred method.
AL 5052 cannot be hardened by means of heat treatment. It does harden due to cold working.
The alloy may be forged in the temperature range of 950 F down to 500 F.
Hot working, as with forging, may be done in the range of 950 F to 500 F.
The alloy cold works readily and may be formed by drawing or spinning. However the amount of cold work imparted by spinning makes intermediate annealing necessary.
Anneal at 650 F and air cool.
Hardens only from cold working.
Other Physical Props
Electrical conductivity 33% of copper.
Other Mechanical Props
Shear strength for O temper is 18 ksi. For cold worked temper H 34 it is 21 ksi.
Density (lb / cu. in.) 0.097
Specific Gravity 2.68
Melting Point (Deg F) 1130
Modulus of Elasticity Tension 10.2
Modulus of Elasticity Torsion 3.8
Contact us if you need more details on Aluminum Plate. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hot Roll、Aluminum Association. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Aluminum sheet
Premium Related Products