China Factory Aluminum Cladding Coil Foil

Model NO.: 5052 Application: Decorations Grade: 5000 Series Technique: Rolling Temper: O - H112 Trademark: BAODI Origin: China Type: Aluminum Coils Shape: Rectangular Surface Treatment: Mill Finish Alloy: Alloy Certification: ASTM, GB/T Specification: GB/T 3880-2006 HS Code: 7606711

Specification	Name: 5000 series Aluminum coil
	Alloy: 5052, 5005, 5754, 5083 etc.
	Temper: O, H12, H22, H32, H14, H24, H26, H18, H112 etc.
	Thickness: 0.2-5mm
	Width: Up to 1800mm
	Coil weight: 5-6tons
	Surface treatment: mill finished, anodized, embossed, PVC coated
Feature	Machinability: It has relatively fair machinability. It is easier to machine in the hard temper than as annealed and the quality of finish is better if machined in the hard condition. Oil lubricants should be used for machining, except that very light cuts may be done dry.
	Forming: It is readily formed at room temperature. Successive cold working decreases the formability.
	Heat Treatment: It cannot be hardened by means of heat treatment. It does harden due to cold working.
	Forging: It may be forged in the temperature range of 950 F down to 500 F
	Cold Working: The alloy cold works readily and may be formed by drawing or spinning. However the amount of cold work imparted by spinning makes intermediate annealing necessary.
	Annealing: Anneal at 650 F and air cool.
	Hardening: Hardens only from cold working.
Application	hydraulic tubes, kitchen cabinets, small boats, home freezers, milk crates, aircraft tube, fencing, small boats, gas lines, refrigerator panels, utensils, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, missile components etc.
Alloy	Chemical Component %≤
	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	others		Al
										single	total
5052	0.25	0.4	0.1	0.1	2.2-2.8	0.15-0.3	\	0.1	\	0.05	0.15	remainder
5005	0.3	0.7	0.2	0.2	0.5-1.1	0.1	\	0.25	\	0.05	0.15	remainder
5754	0.4	0.4	0.1	0.5	2.6-3.6	0.3	\	0.2	0.15	0.05	0.15	remainder
5083	0.4	0.4	0.1	0.4-1.0	4.0-4.9	0.05-0.25	\	0.25	0.15	0.05	0.15	remainder
Contact	Ms. Margaret								Tel: 0086-15553544561

Contact us if you need more details on China Factory Aluminum Cladding Coil Foil. We are ready to answer your questions on packaging, logistics, certification or any other aspects about China Aluminium Cladding Foil、China Aluminum foil. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Extruded Aluminium Profile